Difference between revisions of "Managing Local Changes with Mercurial Queues"

From gem5
Jump to: navigation, search
m (Rebase Extension)
(Rebase Extension)
Line 101: Line 101:
  
 
== Rebase Extension ==
 
== Rebase Extension ==
The rebase extension is a useful tool that allows you too keep your local changes "detached" from the mainstream repository while still keeping them compatible with it. This extension will essentially reapply your local changes on top of the up stream changes. More info about the rebase extension, and its advanced uses, can be found [http://mercurial.selenic.com/wiki/RebaseExtension here].
+
The rebase extension is a useful tool that allows you too keep your local changes "detached" from the mainstream repository while still keeping them compatible with it. This extension will essentially reapply your local changes, i.e., the changes in your patch queue, on top of the up stream changes. More info about the rebase extension, and its advanced uses, can be found [http://mercurial.selenic.com/wiki/RebaseExtension here].
  
 
=== Example use of the rebase extension ===
 
=== Example use of the rebase extension ===

Revision as of 16:08, 9 March 2013

Repository Management Problem

gem5 users typically opt to freeze their repository at a particular changeset when starting a new research project. This approach has several downsides:

  • It discourages users from contributing back any useful changes they may develop.
  • If a useful change is added upstream, it's a long, tedious process to update.

If a user chooses to keep their local repository up-to-date with the source tree they typically use named branches and merge any upstream changes into their branches. This approach also has its downsides:

  • If any local change needs to be updated, it requires a separate commit.
  • If you have several small, unrelated changes, separate branches must be maintained.
  • Upstream changes must be merged into the local branches.

A powerful tool that overcomes these problems is the mercurial queue extension.

Mercurial Queues

The mercurial queue extension is a powerful tool that allows you to:

  • Manage small changes easily as a set of well-defined patches.
  • Edit previous patches without having a new commit.
  • Keep your local changes cleanly separated from upstream changes.
  • Prevent changes from being recorded in the project history until they are ready.

This guide will give a brief overview of the basic functionality of mercurial queues, which should be enough information to enable you to effectively manage your local changes and allow you to contribute them to the reviewboard if you choose to do so. However, there are many more advanced uses of mercurial queues that may be beneficial.

Basic MQ commands

Help Command
  • hg help mq --- Gives a list of mercurial queue commands and a brief description of each.
Creating and handling patches
  • hg qnew change1.patch -m "commit message" --- Create a new patch named "change1.patch" with a commit message.
  • hg qpop --- Pop topmost patch off the queue.
  • hg qpush --- Push next patch in the series onto the queue.
  • hg qrefresh --- Add any local changes to the topmost patch.
  • hg qfinish --- Remove patch from the queue and make a permanent part of the repo history.
Checking the status of patches in the queue
  • hg qapplied --- List all applied patches in the queue.
  • hg qseries --- List all patches in the current series (this includes even patches that aren't applied).
  • hg qdiff --- Display the diff for the applied patch at the top of the queue
Adding patches from other queues
  • hg qimport -e pre_existing.patch --- Adds a pre-existing patch called "pre_existing.patch" to the local queue.

Advanced mercurial queue usage

Here will give a list of some of the advanced uses of mercurial queues, and provide pointers to more in-depth information about them.

  • Queue Guards - Guards will allow you to manage patches by placing "guards" on them, i.e., you may perform actions on a specific set of patches based on the guard(s) placed on them. See this guide for more information.
  • Multiple Queues - You can maintain multiple patch queues and even maintain versions of patch queues. More info can be found here.

Example Mercurial Queue Use

Enable the MQ extension

To enable the mercurial queue extension, simply add the following to your .hgrc file:

[extensions]
hgext.mq =

Simple workflow with MQs

Here is a simple example outlining basic MQ usage:

# clone a clean copy of gem5
hg clone http://repo.gem5.org/gem5

# initialize a new mercurial queue
cd ./gem5
hg init --mq

# make some local changes and turn them into a patch
hg qnew change1.patch -m "cpu: made some changes to the cpu model"

# we have some more changes that we want to turn into a separate patch
hg qnew change2.patch -m "cache: made some changes to the cache"

# now you want to make some more changes and include them in change1
# make sure change1 is at the top of the queue
hg qtop

>>> change2.patch

# it's not, so we have to pop change2 off the queue
hg qpop
hg qtop

>>> change1.patch

# now it's the top patch. make the necessary changes and update
hg qrefresh

# re-apply change2
hg qpush

# let's check that all of our patches are applied
hg qapplied

>>> change1.patch
>>> change2.patch

Rebase Extension

The rebase extension is a useful tool that allows you too keep your local changes "detached" from the mainstream repository while still keeping them compatible with it. This extension will essentially reapply your local changes, i.e., the changes in your patch queue, on top of the up stream changes. More info about the rebase extension, and its advanced uses, can be found here.

Example use of the rebase extension

To enable the rebase extension, simply add the following to your .hgrc file:

[extensions]
rebase =

Suppose you have some patches applied in your local patch queue, then you do a pull request from the upstream repo:

hg pull -u

Now, simply rebase your local changes:

hg rebase