Difference between revisions of "InOrder Resource-Request Model"

From gem5
Jump to: navigation, search
(Resource Internals)
(Resource Internals)
 
(One intermediate revision by the same user not shown)
Line 29: Line 29:
 
Each Resource contains a enumerated list of commands that it recognizes. The execute() function expects an instruction to request a resource to perform one of the commands
 
Each Resource contains a enumerated list of commands that it recognizes. The execute() function expects an instruction to request a resource to perform one of the commands
 
on this list for processing.
 
on this list for processing.
 +
 +
An example from resources/branch_predictor.hh:
 +
<pre>
 +
  enum Command {
 +
        PredictBranch,
 +
        UpdatePredictor
 +
    };
 +
</pre>
  
 
=== Slots ===
 
=== Slots ===
Line 38: Line 46:
 
tries to perform the appropriate operation. If the operation isnt completed successfully, execute() will mark the completed variable "false" and if the the operation
 
tries to perform the appropriate operation. If the operation isnt completed successfully, execute() will mark the completed variable "false" and if the the operation
 
is successful, the completed variable for that resource-request will marked as true.
 
is successful, the completed variable for that resource-request will marked as true.
 +
 +
 +
An example from resources/branch_predictor.cc:
 +
<pre>
 +
void
 +
BranchPredictor::execute(int slot_num)
 +
{
 +
    ...
 +
    ResourceRequest* bpred_req = reqMap[slot_num];
 +
 +
    ...
 +
 +
    switch (bpred_req->cmd)
 +
    {
 +
      case PredictBranch:
 +
        {
 +
 +
            ...
 +
 +
            bpred_req->done();
 +
        }
 +
        break;
 +
 +
      case UpdatePredictor:
 +
        {
 +
            ...
 +
 +
            bpred_req->done();
 +
        }
 +
        break;
 +
 +
      default:
 +
        fatal("Unrecognized command to %s", resName);
 +
    }
 +
}
 +
</pre>
 +
 +
== Resource Pool ==
 +
The ResourcePool is the interface that the CPU must go through in order to access a resource. The "pool" instantiates all resources, allocates IDs to resources, and can schedule events to be processed on one or all of the resources available to the CPU.
 +
 +
'''Relevant source files:'''
 +
* resource_pool.[hh,cc]
 +
* resource.[hh,cc]
 +
* resources/*.[hh,cc]
 +
* pipeline_traits.[hh,cc]
 +
* cpu.[hh,cc]
 +
 +
=== Interaction w/CPU ===
 +
As stated before, the resource pool encapsulates all of the resources that a CPU accesses. Consequently, the CPU must first access the resource pool before receiving access to any specific resource. Conversely, a resource can talk to the CPU by grabbing a pointer to the CPU through the resource pool.
 +
 +
Typically, the CPU will access the resource pool in just a few cases:
 +
# An instruction request in a pipeline stage
 +
# Broadcasting a CPU Event
 +
# Non-cycle-accurate instances such as initialization, system calls, and in the future checkpointing.
 +
 +
=== Resource Pool Events ===
 +
The resource pool allows the CPU to broadcast events that all of the resources will see and process. This is beneficial to provide the CPU ability to transfer information to resources and provide for resources the ability to generically pass information to other resources.
 +
 +
By default, any CPU event that is scheduled (excluding the Tick event) is copied and scheduled as a ResourcePool event. A list of CPU events is available in cpu.hh:
 +
<pre>
 +
    enum CPUEventType {
 +
        ActivateThread,
 +
        ActivateNextReadyThread,
 +
        DeactivateThread,
 +
        HaltThread,
 +
        SuspendThread,
 +
        Trap,
 +
        InstGraduated,
 +
        SquashFromMemStall,
 +
        UpdatePCs,
 +
        NumCPUEvents
 +
    };
 +
</pre>
 +
 +
Each of these events are implemented as virtual functions in the "Resource" base class, such that any resource that needs to react to any of the aforementioned events simply needs to override the virtual function in it's implementation.
 +
 +
The ResourcePool also has a few specific events that resources can schedule themselves. The current list is found in resource_pool.hh:
 +
<pre>
 +
    enum ResPoolEventType {
 +
        InstGraduated = InOrderCPU::NumCPUEvents,
 +
        SquashAll,
 +
        UpdateAfterContextSwitch,
 +
        Default
 +
    };
 +
</pre>
  
 
== Predefined Resources ==
 
== Predefined Resources ==

Latest revision as of 23:07, 19 January 2010

Overview

Resources consists of any CPU object that an instruction wants to access. This could be a branch predictor, a cache, a execution unit, etc. In the InOrder CPU model we abstract what a resource is into a generic "Resource" class that all specific resources must derive from. In any given pipeline stage, an instruction will request that a resource perform a specific operation on it's behalf. If an instruction can complete all it's resource requests for a given stage, then it may pass to the next stage.

Relevant source files:

  • resource.[hh,cc]
  • resources/*.[hh,cc]
  • pipeline_traits.[hh,cc]
  • cpu.[hh,cc]

Resource-Request Model

Ideally, resources can used by instructions as a black box that will perform specific operation.The basic steps between an instruction and resource are as follows:

  • An instruction accesses a resource by generating a resource-request that contains:
  1. The ID of the resource to be accessed
  2. A command for the resource to perform


  • After generating a resource-request, an instruction sends the request to the Resource Pool which will forward the request to the appropriate resource.


  • Once a resource receives a request, it will:
  1. Check to see if there is room (i.e. bandwidth) to process that resource request. If there is room, a slot is allocated to that instruction
  2. Attempt to process the command that the instruction requests of it.
    1. If that command is successful, the resource mark the request as completed and return it back to the instruction.
    2. If that command is unsuccessful, the resource will mark the request as not completed before returning it back to the instruction.

Resource Internals

Commands

Each Resource contains a enumerated list of commands that it recognizes. The execute() function expects an instruction to request a resource to perform one of the commands on this list for processing.

An example from resources/branch_predictor.hh:

   enum Command {
        PredictBranch,
        UpdatePredictor
    };

Slots

Slots represent the bandwidth of the resource (or how many concurrent instructions can access the resource). Each time an instruction makes a request to a resource, the resource allocates a slot to that instruction to represent the resources' bandwidth being used.

Execute

Once an instruction is allocated a slot, it is eligible to be executed within that resource. The execute function read the command from the resource-request and then tries to perform the appropriate operation. If the operation isnt completed successfully, execute() will mark the completed variable "false" and if the the operation is successful, the completed variable for that resource-request will marked as true.


An example from resources/branch_predictor.cc:

void
BranchPredictor::execute(int slot_num)
{
    ...
    ResourceRequest* bpred_req = reqMap[slot_num];

    ...

    switch (bpred_req->cmd)
    {
      case PredictBranch:
        {

            ...

            bpred_req->done();
        }
        break;

      case UpdatePredictor:
        {
            ...

            bpred_req->done();
        }
        break;

      default:
        fatal("Unrecognized command to %s", resName);
    }
}

Resource Pool

The ResourcePool is the interface that the CPU must go through in order to access a resource. The "pool" instantiates all resources, allocates IDs to resources, and can schedule events to be processed on one or all of the resources available to the CPU.

Relevant source files:

  • resource_pool.[hh,cc]
  • resource.[hh,cc]
  • resources/*.[hh,cc]
  • pipeline_traits.[hh,cc]
  • cpu.[hh,cc]

Interaction w/CPU

As stated before, the resource pool encapsulates all of the resources that a CPU accesses. Consequently, the CPU must first access the resource pool before receiving access to any specific resource. Conversely, a resource can talk to the CPU by grabbing a pointer to the CPU through the resource pool.

Typically, the CPU will access the resource pool in just a few cases:

  1. An instruction request in a pipeline stage
  2. Broadcasting a CPU Event
  3. Non-cycle-accurate instances such as initialization, system calls, and in the future checkpointing.

Resource Pool Events

The resource pool allows the CPU to broadcast events that all of the resources will see and process. This is beneficial to provide the CPU ability to transfer information to resources and provide for resources the ability to generically pass information to other resources.

By default, any CPU event that is scheduled (excluding the Tick event) is copied and scheduled as a ResourcePool event. A list of CPU events is available in cpu.hh:

    enum CPUEventType {
        ActivateThread,
        ActivateNextReadyThread,
        DeactivateThread,
        HaltThread,
        SuspendThread,
        Trap,
        InstGraduated,
        SquashFromMemStall,
        UpdatePCs,
        NumCPUEvents
    };

Each of these events are implemented as virtual functions in the "Resource" base class, such that any resource that needs to react to any of the aforementioned events simply needs to override the virtual function in it's implementation.

The ResourcePool also has a few specific events that resources can schedule themselves. The current list is found in resource_pool.hh:

    enum ResPoolEventType {
        InstGraduated = InOrderCPU::NumCPUEvents,
        SquashAll,
        UpdateAfterContextSwitch,
        Default
    };

Predefined Resources

The following pipeline resources are defined for InOrderCPU:

  • Fetch Unit
  • Instruction Cache (I-Cache)
  • Branch Prediction Unit (BPred Unit)
  • Register File Manager (RF Manager)
  • Address Generation Unit (AGen Unit)
  • Execution Unit (EXU)
  • Integer Multiply and Divide Unit (Int MDU)
  • Data Cache (D-Cache)
  • Graduation Unit (Grad Unit)

Defining Your Own Resources

The easiest way to define your own resource is to find a resource that is similar to what you are trying to create, and then use that as a template for your design.

More specifically, you'll need to derive from the "Resource" class and then define your own resource-specific "execute" function. In the simplest case, where your resource is of zero (same-cycle) latency, then this should do the trick. If you resource processes requests on multiple cycles, then a good example of that is the instruction buffer, the caches, or the multiply/divide units.

Also note, for an instruction to use your resource, you need to :

  1. Add the resource to the resource pool
  2. Add the resource to that instruction's instruction schedule